Lit. No. 40694, Rev. 04
24
May 1, 2021
BLADE DROP SPEED ADJUSTMENT
1. The plow drop speed may be adjusted by turning
the needle valve.
NOTE: The blade will not drop when drop speed
needle valve is fully tightened (clockwise). Turn
OFF the plow control, turn the needle valve
1/8 turn outward (counterclockwise), then proceed
with blade drop speed adjustment.
2. Lower the blade to the ground before making
adjustment.
OPERATING YOUR SNOWPLOW
WARNING
Keep 8' clear of the blade when blade is being
raised, lowered, or angled. Do not stand
between the vehicle and blade or directly in
front of blade. If the blade hits or drops on
you, you could be seriously injured.
3. Turn the needle valve inward (clockwise) to
decrease the drop speed. Turn the needle valve
outward (counterclockwise) to increase the drop
speed.
4. Stand 8' clear of the blade when checking
adjustment.
Drop Speed Adjustment
