manualshive.com logo in svg

DOUGHXPRESS TXM-20, Owner'S Manual, Page: 7 / 16

Share
Download
DOUGHXPRESS TXM-20 Owner'S Manual Download Page 7

7

MACHINE PRESETS 

STORING PRESETS:
NOTE:

  The factory default settings for all presets is set to 200°F and 10 

seconds.

1.  Set the desired temperature and/or cycle time using the temperature 

and time adjustment instructions in this document.

2.  Press and hold the desired preset location for two seconds. The con-

troller will beep and the preset location button will display in reverse 

indicating the preset is stored in memory.

RECALLING PRESETS:

1.  Press and release for approximately 1/2 second the preset button to 

recall. The controller will beep and the preset location button will display 

in reverse indicating the preset has been changed.

NOTE:

  The new set values will display for 1 second before the controller 

starts adjusting the temperature or time to match the new set-

point.

PRESET 

LOCATIONS

TEMPERATURE 

SETTING

TIME 

SETTING

HOME MENU SCREEN

PRESET 1 SELECTED

(two preset setting shown)

PRESET 2 SELECTED

(two preset setting shown)

PRESET 

LOCATIONS

(press 1/2 second 

to recall)

Summary of Contents for TXM-20

















Reviews:

No comments