DOUGHXPRESS TXM-20 Owner'S Manual Download Page 4

Page: 4 / 16

SETTING TEMPERATURE & TIME

ADJUST TEMPERATURE:

1. Touch the temperature readout on the display. “UP” ▲ and “DOWN” ▼

arrows will appear on the right side of the display and the temperature

value will start flashing and to indicate it is in set mode.

2. Press the “UP” ▲ or “DOWN” ▼ arrow to change the temperature

value. Holding down on an arrow will change the temperature in 1 de-

gree increments for 10 values; then change to 10 degrees incremental

changes.

3. Once the desired temperature value is set, either press the temperature

value to lock the set temperature or simply wait for 2 seconds and it

will lock in the new value automatically.

ADJUST CYCLE TIME:

1. Touch the time readout on the display. “UP” ▲ and “DOWN” ▼ arrows

will appear on the right side of the display and the cycle time value will

start flashing and to indicate it is in set mode.

2. Press the “UP” ▲ or “DOWN” ▼ arrow to change the cycle time value.

Holding down on an arrow will change the time in 1 second increments

for 5 values; then change to 10 seconds incremental changes.

3. Once the desired cycle time value is set, either press the time readout

to lock the cycle time or simply wait for 2 seconds and it will lock in the

new value automatically.

TEMPERATURE ADJUSTMENT SCREEN

TEMPERATURE

READOUT/SETTING

UP ARROW

DOWN ARROW

TEMPERATURE ADJUSTMENT SCREEN

UP ARROW

DOWN ARROW

TIME

READOUT/SETTING

Summary of Contents for TXM-20

















Search results

Summary of Contents for TXM-20

Reviews:

Related manuals for TXM-20

Brands by name

Popular brands

DOUGHXPRESS TXM-20, Owner'S Manual

Search results

Summary of Contents for TXM-20

Reviews:

Related manuals for TXM-20

Brands by name

Popular brands