Page 4 of 8
PRESET 10 ARCHITECTURAL
– INSTALLATION
WIRING INFORMATION
The
Preset 10 Architectural
is designed to use daisy-chain wiring topology. An alternative to the daisy-
chain topology is the star topology. To create a star, a bidirectional isolated splitter (model 127) is
required. Also note that a system may contain multiple power supplies when voltage drop becomes a
concern. Please give us a call if you have any questions.
CABLE
COLOR
FROM
TO
USE
1
120 Ohm Data Cable
Belden 9829
or
Equivalent
Shield
5 Pin XLR Plate
Pin 1
PRE10 Main
TB1-1
Common
White/Blue
Stripe
Pin 2
TB1-2
Data -
Blue/White
Stripe
Pin 3
TB1-3
Data +
2
(
2) #16 AWG
Stranded Wires
Black
Power Supply
Common
TB1-4
Supply
common
Red
Power
TB1-5
Supply “hot”
3
120 Ohm Data Cable
Belden 9829
or
Equivalent
Shield
PRE10 Main
TB1-1
PRE10 Remote
TB1-1
Common
White/Blue
Stripe
TB1-2
TB1-2
Data -
Blue/White
Stripe
TB1-3
TB1-3
Data +
4
(2) #16 AWG
Stranded Wires
Black
TB1-4
TB1-4
Supply
common
Red
TB1-5
TB1-5
Supply “hot”
5
120 Ohm Data Cable
Belden 9829
or
Equivalent
Shield
PRE10 Remote
TB1-1
Dimmer Cabinet
?
Common
White/Blue
TB1-2
?
Data -
Blue/White
Stripe
TB1-3
?
Data +
POWER SUPPLY
The voltage provided to the
Preset 10 Architectural
must be between 9 and 15 volts AC or DC, 200mA
per station. The
Preset 10 Architectural
has been designed to operate on a standard class 2 “doorbell”
transformer (e.g. Ace Hardware’s model #ACE36483 10 volt 5 watt transformer).
