Page 4 of 10
REAR INTERFACE
The PRE10ETHER-A has a set of rear mounted controls that are accessed during initial
commissioning of the wall station. The rear interface changes network settings, lockouts
and button behavior. Once setup is complete, this interface remains facing into the two
gang wall box and is not accessed by users changing presets on the front interface.
The rear interface has a monochrome graphical Liquid Crystal Display (LCD), and a
rotary encoder with a button. The LCD displays the configuration pages which are
edited by turning the encoder, and pressing the button. The configuration page changes
when the page change symbol is highlighted [< >] and the encoder wheel is turned.
Depressing the encoder shaft acts as a button to toggle between the editable fields on
the screen. A highlight appears in the background of the editable field, at which point
the wheel changes the highlighted value. In addition to the LCD and encoder based
configurations, three jumpers select settings that are not accessed in the LCD menus.
