Page 10 of 10
two digit time may be entered with leading zeros (e.g. five seconds as 005
or PRESET SELECT buttons
OFF, OFF, 5).
b. Enter a one or two digit time followed by pressing the TIME SETTING
MODE button. The green preset indicator LED will illuminate steadily and
the yellow LED will go off, indicating success.
c. Enter a one or two digit time and wait for ten seconds for the time setting
mode to exit automatically. The green preset indicator LED will illuminate
steadily and the yellow time LED will go off, indicating success.
PRESET NUMBER 10 (OFF)
– SPECIAL FUNCTION
When the levels stored in preset number 10 (OFF) are
all zeros
, a special function is
enabled. When preset number 10 (OFF) is selected and the crossfade has completed,
the PRE10ETHER-A will stop sending sACN. By ending sACN transmission, many
moving lights and dimming systems will enter their standby mode. This feature can be
disabled by recording any non-zero level on any of the 2,048 channels into preset
number 10 (OFF).
Limited Manufacturer's Warranty
Products manufactured by Doug Fleenor Design (DFD) carry a five-year parts and labor
warranty against manufacturing defects. It is the customer's responsibility to return the
product to DFD at the customer's expense. If covered under warranty, DFD will repair
the unit and pay for return ground shipping. If a trip is necessary to the customer's site
to solve a problem, the expenses of the trip must be paid by the customer.
This warranty covers manufacturing defects. It does not cover damage due to abuse,
misuse, negligence, accident, alteration, or repair by other than by Doug Fleenor
Design.
Most non-warranty repairs are made for a fixed $50.00 fee, plus shipping.
Doug Fleenor Design, Inc.
396 Corbett Canyon Road
Arroyo Grande, CA 93420
(805) 481-9599 voice and FAX
(888) 4-DMX512 toll free (888) 436-9512
web site: http://www.dfd.com
e-mail: [email protected]
