Page 10
Details of Monitor
Time(TIME) 00:00-99:59
Speed(SPD) 0.0-99.9ML/H
Distance(DIST) 0.0-99.99ML
Calories(CAL) 0.00-99.9KCAL
Pulse(PUL) 40-240BPM
Mode Parameters
Operation
Speed(SPD) ----------------------This mode displays the speed of your exercise in real time.
Time(TIME) ---------------------This mode displays the time you have pedaled.
Distance(DIST) ------------------This mode displays the distance you have pedaled.
Calories(CAL) -------------------This mode displays the calories you have burned during your exercise.
Pulse(PUL) ----------------------This mode displays your heart rate per minute.
Turn on/off
The monitor will automatically turn on when you start to exercise, and you can also turn on it manually by
pressing those buttons.
The monitor will automatically turn off after a while when you stop exercise.
If there is no data showing, please check if all cable have connected, or change the batteries.
(
The battery
model is AAA .
)
Enter
(This button is used to choose the mode you want to set except speed.)
If you don’t set goal data, the monitor would show your exercise data normally.
The mode will be flashing when chosen.
If you long press the button over 3 seconds, all data will be zeroed.
UP/ Down
(These two buttons are used to set your exercise goals up and down.)
After you press the button “Enter” to choose a mode you want, you can press these two buttons to set your
goals.
Reset
(These two buttons are used to reset your exercise data or goals data.)
Press the “Enter” button to choose a mode except speed. Then press the “Reset” button to reset the relevant
data.
If you long press the button over 3 seconds, all data will be zeroed.
UP
RESET
DOWN
RESET
SPEED
TIME
DISTANCE
CALORIE
PULSE