Foam Conduit Feed Plugs for ½” I.D. Conduit
VENT STOPPER PLUGS for Conduit
QUICK INSTALLATION GUIDE
1) Pull wires to final installed length.
2) Open Vent Stop Plug and install over wire.
3) Pinch Plug to compress over wire, and
insert into conduit feed mouth.
4) Push plug into conduit mouth with finger
tips till it flush with outside of fitting.
5) Repeat steps 1-4 for any other conduit
feeds as needed.
6) To assure an airtight seal, caulk around
wires and cables, coating entire plug surface
with sealant.
Prevents Humid Air exchange from venting thru electrical conduit into Dotworkz sealed enclosure.
Thus eliminating condensation issues within Dotworkz sealed enclosures.
