Generic Camera Installation
Open enclosure by unscrewing 4 captive phillps screws and open hinge.
Remove camera mount plate by unscrewing four philips screw, and loosening 2 front camera plate screws.
One ¼”-20 x 3/8” camera mount screw is provided on camera plate; organize camera parts to be installed.
Using ¼” bolt provided, mating camera to mount bracket. Adjust camera to sit strait and slightly overhang front of
mounting bracket. Gently but securely tighten bolt with camera pointing strait on mount plate.
Re-install camera plate into S-Type, placing camera lens close to enclosure lens. For cameras that have
adjustable focal lens’, allow enough room for lens clearance. Re-install & Tighten all mounting plate screws.
