Assembly
2. Assembly with mounting bracket (enclosed)
Please remove first the steel peg and the spot from the assembly bracket, by declamping the screws.
Mark the position of the hole for the assembly bracket on the surface. Drill a hole in the ground and
equip it with a suitable plug. The included plug is suitable for mounting on substrates made of con-
crete, stone and masonry. For wood surfaces, the mounting angle can be mounted directly with an
appropriate screw with using the plug. In the case of hardwood it may be useful drilling a hole before
mounting. Place the mounting bracket right over the plug,
align in the desired direction and tighten it up with an appropriate screw. Now the LED garden spot
230 V can be attached to the mounting bracket. Plug an appropriate screw through the hole of
the mounting bracket and fix it laterally with a hexagon-wrench into the threaded hole on the light
housing. Adjust the spotlight before tightening into the desired direction.
3. Using the installation extension (optional)
The mounting extension is intended to be used together with the ground spike. Mounting extensions
can be combined.
Screw the mounting extension onto the ground spike using the threaded pin. Tighten the mounting
extension: To do this, use a pair of pliers and enclose a cloth or similar so as not to scratch the
mounting extension.
Then screw the mounting bracket of the light onto the mounting extension using the screw and
snap ring supplied with the ground spike. The snap ring is placed between the screw head and the
mounting bracket. Align the mounting bracket before tightening.
Plug connection
Connection with 230 V safety contact socket
Connection of the spot
1.
Place the LED garden spot on the appropiate area.
2.
Lay the power line in direction of the socket-outlet.
3.
Put safety plug into power socket - Ready.
9
en
230 V 50 Hz
safety contact socket
5 m
eco 230 V, 6W
