15
Each time Dosell starts up it automatically calibrates the sensor that detects
whether there is a sachet in the compartment. It is therefore very important
that the sachet compartment is empty when Dosell is started.
To turn off Dosell, press and hold the On/Off button for at least 8 seconds. A sound signal
confirms that the device is being turned off. Dosell will not dispense sachets while it is
turned off.
If Dosell has a sachet roll already loaded when it is turned off, the sachets will
automatically be ejected backwards. This will also happen if the machine is
turned off and on again for some reason. You will then need to load the
sachet roll into Dosell again. A periodic test is performed at least every 5
hours and Dosell will give an alert if anything is wrong or if there is any
problem with the new feed, which is unlikely. Make sure that Dosell is re-
loaded correctly as per the instructions for loading a medication sachet roll.
When Dosell is turned off, all three status lights on the left side will go out.
The mains adapter can then be unplugged to completely disconnect it from the mains.
6.3
Connecting to Dosell
This instruction assumes that the Dosell device has already been configured for a user.
If not, this needs to be done first – see instructions in section 5.3 Configuring Dosell for a
new user.
Make sure that Bluetooth is activated on the phone that is to be
connected.
1. Open the Dosell app on the phone.
2. Select Connect to Dosell* and follow the instructions in the app.
*If you are using Dosell as a healthcare professional, you must be logged in to the app in order to
connect to Dosell. Login details will be given to you by your employer.
6.4 Opening and closing the cover
To load or remove a sachet roll, you need to open the cover.
!
Note
The app must always be connected to Dosell before opening the
cover, otherwise Dosell will give a warning about unauthorized
opening of the cover.
Attention
