4.
Turn on the heater by rotate switch to cause the elements to glow.
When switch model
″
I
″
,
half element is glow, the heater is 1000W.
When switch
″
II
″
,
whole element are glow, the heater is 2000W.
5.
After use, always ensure that the heater is switched off and
unplugged from the main supply.
4. CAUTION
1.
The appliance must always be placed on a firm and leveled surface
and make sure that heater is in clear view at all times.
2.
Always check that there is nothing flammable in front of or to the
rear and sides of the heater.
3. Always make sure that nothing can either drop or fall onto the
heater.
4. Make sure that nothing which may melt is placed too close to the
heater.
5. Always make sure that there are no flammable liquids or materials
in the immediate vicinity of the heater.
6.
Never use the heater in wet or damp conditions such as shower
room, bathroom, or anywhere near a swimming pool, hot tub
or Jacuzzi.
7.
The correct operation of the appliance is obtained when the heater
is placed vertically.
8.
When the appliance is not in use switch it off and unplug it.
9. This heater is indoor use only.
Never use the heater outdoor.
10.
Never leave the heater unattended for any period of time or if
there are children or animals
11.
Before cleaning the heater or carrying out any maintenance,
switch off and unplug the heater. Never use water to clean the
heater or allow water to spill onto it as this may cause a short
circuit resulting in a risk of fire.
12.
Heater may not be placed directly below or close to socket.
13. Make sure the using voltage as per rated on product rating label.
2
