CHAT at www.dosatronusa.com
Twist to remove the Omega
spring out of the push rod.
Install the new
Omega Spring
(Part #: PDI651)
by carefully
pushing the Omega spring into
the push rod.
Slide the other end of the Omega
spring into the new
Connecting
Rod
(Part #: PDI649)
. The key
to this step is to make sure the
curved top of the push rod faces
in the same direction as the
Omega spring.
Replace the
Push Rod Seal
(Part #: PDI648)
. Remove by
grasping and turning counter
clockwise. Carefully slide the
new push rod seal onto the
push rod as far as it will go and
twist a quarter turn clockwise
to lock.
10
11
12
4
