Storing the Tent
Step 1
o
Empty all belongings out of the tent.
o
Clean out the interior of the tent by sweeping out any dirt or debris.
o
Allow the tent fabric to dry completely if humidity has built up inside, or if
it has rained.
o
If you must pack the tent wet, be sure to allow it to dry once you have
returned home.
Step 2
o
Remove ground stakes.
o
Move each tent pole towards each other and slowly collapse the tent
inwards.
o
Carefully tilt the tent and lay it on the ground.
Step 3
o
Remove each ring rod from the bottom of each tent pole.
o
Remove each tent pole from its corresponding sleeve.
o
Break down the poles to their individual sections
Step 4
o
Carefully fold and roll up the tent. This is best done by laying the square
floor of the tent down and folding inwards from the corners.
o
Store the tent and tent poles in their respective bags.
Use and Care
o
While the Burro Ridge Tipi Tent is built with durability and longevity in
mind, please be sure to occasionally use a damp rag and wipe the tent
fabric clean.
o
While the canvas material is naturally breathable, condensation could
still build up inside the tent. Condensation can be reduced by allowing air
ventilation. Tents should be allowed to dry completely before storage. If
a tent must be stored while wet, loosely roll the tent for transport and
then immediately unroll and set up after transport to dry thoroughly
before long-term storage. Failure to do so could cause rot or mildew in
the canvas material.
