Assembly
Step 1
o
Loosely spread the tent fabric on the floor. Although our heavy-duty tent
floor is designed to resist punctures and tears, a groundsheet is
recommended for longevity. Select a site where water will not flow
towards the tent.
o
Remove the 4 steel tent poles from the tent storage bag. Assemble each
tent pole by sliding the ends of each section together.
o
Insert the tent poles into the pole sleeves located at all four corners of
the tent. This step is most easily done before fully spreading the tent’s
footprint.
o
Locate the four metal ring rods attached to each corner of the tent.
Insert each ring rod into the holes located at the bottom of the tent
poles.
Step 2
o
Carefully raise the tent into a standing position.
o
Slowly pull the poles away from each other. This will stretch out the
connecting fabric wall of the tent.
o
Once loosely opened, it may be helpful to stake down one corner of the
tent before fully spreading the poles apart.
o
Continue to expand the tent until the wall fabric is tight.
Step 3
o
Stake down each corner of the tent.
o
Tighten the bottom straps located on each corner of the tent floor.
o
Make sure to create adequate ventilation inside the tent by opening the
top ventilation flaps and secure them in place with the supports.
Step 4
ENJOY!
