Fig. 20: Replace air cap
2. Loosen cap nut (3).
3. Remove air cap (4).
Assemble air cap
4.
CAUTION!
Risk of injury from pointed electrode
Fit air cap (4).
5. Align air cap (4) as required
6. Tighten cap nut (3) by hand.
6.5
Alignment of the air cap
Personnel:
Operator
+ additional qualification high tension
technology
+ additional qualification explosion pro-
tection
Protective equipment:
Protective workwear
Anti-Static Safety Boots
The position of the air cap determines the
alignment of the spray pattern.
Fig. 21: Align air cap
1. Lightly loosen the cap nut (2).
2. Turn the air cap (1) as required for the
desired spray pattern.
3. Tighten cap nut (2) by hand.
Operation
11/2019
EcoGun AS MAN DC - MSG00023EN
15/56