background image

Replaces 

Part Sheet 

77-2650R-6  

Part 

Sheet

77-2650R-7

Binks Model M1-G HVLP

GRAVITY FEED SPRAY GUN

The Binks M1-G HVLP Gravity Feed
Gun is a high quality sprayer that 
produces fine finish for compliant and
non-compliant areas. A superbly bal-
anced forged aluminum body provides
you with extra comfort and control.
All components are machined and 
finished to exacting tolerances and
only the best materials are used,
ensuring years of peak efficiency.

Simple to operate, the M1-G HVLP
provides exceptional finishes with
complex coatings such as primers,
base coats, clear coats, single stage
and waterborne compliant materials.
Additionally, specially designed air
and fluid nozzles enable the M1-G
HVLP to operate at more than 65%
transfer efficiency, in compliance with
air quality regulations as a high vol-
ume low pressure air spray gun.

The Binks M1-G HVLP Gravity
Feed Spray Gun includes a metal
paint cup with drip-proof cover. 

To obtain optimum performance from
your new M1-G HVLP Gravity Feed
Spray Gun, read all instructions care-
fully.

PACKAGE CONTENTS

Please note your Binks M1-G HVLP
Gravity Feed Spray Gun package
was shipped with the following con-
tents. If anything in the following
list is missing, call 1-800-992-4657
for a prompt shipment to you of the
missing item.

Illustration Key

1.  Air Nozzle Assembly
2.  Gravity Feed Cup
3.  Gun Body
4.  Side Port Control
5.  Fluid Control Knob
6.  Air Connection 1/4" NPS(m)

2

1

3

4

5

6

PART

NO.

DESCRIPTION

QTY.

M1-G HVLP GRAVITY FEED SPRAY GUN ........ 1

77-2650

M1-G PART SHEET............................................ 1

54-4720

1 LITER GRAVITY FEED CUP ASSEMBLY.......... 1

SBBI-4-043 1 LITER CUP ASSEMBLY PART SHEET .............. 1
54-3871

GUNNERS MATE .............................................. 1

82-469

GUN BRUSH (ROUND)...................................... 1

192219

PLASTIC COATED GUN HOOK ........................ 1

82-221

CLEANING BRUSH (FLAT) ................................ 1

NOTE

IMPORTANT REGULATORY NOTE regarding
the use of this product appears on page 9.

Summary of Contents for M1-G HVLP













Reviews: