6.4
Painting
NOTICE!
Paint damages due to wrong guiding of
the spray gun
If you guide the spray gun at an angle or
in an arc, the spray jet meets the surface
to be painted unevenly. Different dis-
tances arise in the spray jet between the
spray gun and surfaces to paint. This
results in uneven material coat thickness
and painting defects.
If the distance to the surface to be painted
is too short, too much material reaches
the surface. Drops and runs arise on the
surface.
If the distance to the surface to be painted
is too much, too little material reaches the
surface. Spray mist is produced. Dry
atomization gives rise to a raw and matter
material layer.
– Guide the spray gun in a straight line at
a 90° angle at a constant distance of
25 to max. 30 cm from the surface to
be painted.
– Guide spray gun with a constant
speed.
– Ensure that correct material pressure
according to the material consistency
is selected.
– Ensure that correct nozzle according to
the material consistency is selected.
Personnel:
Operator
+ additional qualification explosion pro-
tection
+ Additional qualification high pressure
Protective equipment:
Protective workwear
Safety boots
Protective gloves
Eye protection
Use ear protection
Respiratory protection device
Requirements:
The spray gun is unlocked.
Fig. 6: Painting
1. Drive the trigger (1) completely.
ð
The material is pumped.
Operation
05/2018
EcoGun AL MAN 300 - MSG00016EN
12/44
