manualshive.com logo in svg

Doro GW7001, Quick Installation Manual

Share
Download
Doro GW7001 Quick Installation Manual Download Page 22

22

www.doro.com

4.1.2. DHCP configuration

Sett�n�� t�e G�7001 �n �HC��, ������ �e�ect t�e ��HC���� �����o ��tton.

When the DHCP mode is selected, the value of the fields associated to the 

net�o�� �����ete�� o� t�e G�7001 ��e not t�e �e�� net�o�� �����ete�� ��e��. 

T�e �n�o���t�on ��o� t�e �HC�� �e��e� ���� ��o� ��en �����t �� ��e��e��.

�n �HC�� �o��e, �t �� �t��� �o�����e to ��o����� t�e G�7001 ��S ��n����� o� 

�ece���n�� �t ��to��t�c���� ��� t�e �HC��.

4.1.3. PPPoE configuration

Sett�n�� t�e G�7001 �n ������o� �o��e, ������ �e�ect t�e �������O��� �����o ��tton 

�n�� ente� � ������O� ��e� n��e �n�� ������O� �����o��� to ��e t�e ��otoco�.

When the PPPoE mode is selected, the value of the fields associated to the 

net�o�� �����ete�� o� t�e G�7001 ��e not t�e �e�� net�o�� �����ete��. 

T�e ����������e���n�� ���� �e ����t����te�� �� t�e ������o� ��otoco�. �n ������o� 

�o��e, �t �� �t��� �o�����e to ��o����� t�e G�7001 ��S ��n����� o� �ece���n�� �t 

��to��t�c���� ��� t�e ������o�.

4.1.4. Time server configuration

T�e G�7001 c�n ��nc��on�ze ��t� � t��e �e��e� (�T��). T��� �ect�on ��o�� 

t�e t��e �e��e�� ������e��. �t �� �o�����e to ente� t�e �e��e� n��e. �� no �e��e� �� 

entered, the GW7001 sets the time to the 1st January of 1970. It is also possible 

to �ct���te/��e�ct���te t�e �T�� �e���ce �� �e�ect�n�� t�e �������e���� o� ��n���e���� 

�����o ��tton. Re�e��e� to �et t�e co��ect t��e�zone �n�� note t��t t�e t��e�

zone must be manually configured for Daylight Savings by adding an extra hour. 

It’s important that the internal clock is correctly adjusted since it will 

affect the time-stamp delivered to the phone when using FSK Caller ID.

4.1.5. Validation and activation

To �ct���te �n� c��n��e�, �t �� nece����� to ���te t�e ne� ���t� �n t�e G�7001 

�e�o�� �� ��e���n�� t�e �S����t�� ��tton �n�� to �e�oot t�e G�7001 (��e��e 

�e�e� to t�e 

�S��e/�x�t/Re�oot��

 �ect�on).

4.2. Configuration console

Once connecte�� �n�� ��t�ent�c�te�� to � G�7001 ��� te�net, �t �� �o�����e to 

configure the SIP parameters. The configuration tasks is performed via the 

configuration engine which is accessed with the ‘conf’ command. 

T�e c��n��e� ���� �e �ct���te�� ��te� � �e�oot.

Index

Summary of Contents for GW7001



















































Reviews:

No comments

Brands by name

Popular brands

Load more brands