Doro COMFORT 1005, Manual

Page: 11 / 20

English
4. Enter base unit’s PIN code (default code is 0000). Press OK .
5. If the registration is successful the unit will return to standby within one
minute.
Intercom / internal call
1. Press .
2. Enter call number
1
-
5
for the desired handset or press
9
for all.
A tone will be heard if an external call comes in while an internal call is
in progress. End the internal call with
L
and then answer the external
call with
q
.
Transferring calls/conference between handsets
When an external call is connected;
1. Press .
2. Select INTERCOM . Press OK .
If using more than 2 handsets: Enter call number
1
-
5
for the desired
handset or press
9
for all.
3. To transfer: press
L
,
for conference: press and hold
*
.
Answering machine
When the answering machine is switched on, calls are answered after a set
number of rings, your outgoing message is heard and the caller can leave a
message. Total memory capacity is up to 15 minutes depending on the set
sound quality. Most functions can be accessed from both base unit and handset.
Setup from handset
1. Press . Select
ANS. MACHINE
. Press
OK
.
2. Select TAM SETTINGS . Press OK .
3. Select desired function. Press
OK
.
4. Select desired setting. Press OK .
ANSWER MODE Select ANS & REC or ANSWER ONLY (caller cannot leave
message).
TAM LANGUAGE Select language for pre-recorded outgoing message.
OGM SETTINGS Record/listen to outgoing messages.
ANSWER DELAY
Select after how many rings (
2 RINGS – 8 RINGS
or
TIME
SAVER
) the call will be answered.
RECORD TIME Select maximum recording time for each message.
7