18
Installation
Connection
The CareIP is easy to install and is connected to the broadband/network via the
network cable.
Normally the CareIP is set to use DHCP, which means that the unit automatically will
be assigned an IP address when connected to a network.
The CareIP should always be connected to the network as near incoming broadband
as possible.
•
Connect the power supply to the wall socket and the power supply lead to the
DC input socket
.
•
Connect the network cable from the broadband/network to the Ethernet
socket
on CareIP
•
Turn the power switch
to the
I
position.
•
Check that the “ON” indicator lamp has a steady green light.
•
Carry out a test alarm from the CareIP.
The power supply shall be placed so the information text
“Do not to unplug” is visible.
For further advice regarding installation, contact your supplier.
Installation must be performed only by authorized persons in
accordance with the instructions in the service manual.
Connectors on the back of the
2
1
1
2
Summary of Contents for CareIP Mobile
Page 44: ...44 www doro com care...
