background image

English

SMS messages

This feature requires a current Caller Id subscription to be in place and only applies 

to text message users (SMS). Please remember individual SMS features are country 

dependent and will vary or be unavailable. Further details regarding the SMS text 

message service are available from you local network provider.

Maximum 160 signs per message. The memory can store up to 30 messages.

New SMS message/Caller ID is indicated by 

*

 in standby mode.

Australia only

Short Message Service (SMS) facilities have been automatically activated for most 

Telstra® 

telephone services across Australia. SMS services may not be available to, or between, other 

service providers networks. A description of the SMS service provided by Telstra® can be 

found at:  http://www.telstra.com.au/talkingtext

There is no need to register your telephone with the Telstra® fixed line SMS service as your 

DORO telephone is supplied pre-configured. When you send your first text message the 

Telstra® network will automatically accept and deliver it (providing the destination offers a 

compatible service).

Settings for your Telstra® fixed line SMS service can be changed by calling 0198 339 999 and 

following the prompts.

UK only

-  Program the correct SMS Center numbers as described on next page under the section 

Entering the telephone numbers in SMS centre/operator.

 

E.g. for BT:

 

  Send:  14701709400

 

  Receive:  080058752

 

  Terminal No.: 9

-  To register for the SMS text messaging service you can either send a text message to 

another telephone number, or text REGISTER to 00000.

-  Should you wish to reset your SMS settings text RESET to 00000.

-  You can also request a delivery report by entering * 0 # prior to any SMS message.

-  An SMS message can also be sent to a telephone number that does not support this 

feature, and will be received as a voice message.

-  Not all networks (ie mobile, cable) are compatible.

Please note!

The available functions/services vary depending on service provider. It may not be possible for all service providers 

to offer sending/receiving SMS messages on all types of units.

Some operators offer a service where you can send an SMS message to someone who does not have SMS 

equipment. The message will then be read by a computer voice.

Failed SMS messages are stored in the outbox.

Summary of Contents for 760x





















Reviews: