Doro 760x, Manual

Page: 12 / 20

0
English
Other settings
1.
Press
Menu
.
2.
Scroll to
Setting
. Press
OK
.
3. Scroll to Handset . Press OK .
4. Scroll to required function e.g. Language . Press OK .
5. Scroll to required setting. Press OK .
Auto Answer The handset answers incoming calls when it is lifted from the base unit.
Vibrator
The vibrator that is activated when the phone rings can be turned off/on.
Select Base Only used in systems with more than one base unit.
Language
Language setting is explained in Connection .
Country code See separate description for programming country codes.
Baby Monitor Cordless baby monitor, see separate description.
Abbr number
Programming of speed dial numbers. To call one of these, press down
the corresponding button
1
-
3.
Network It is possible to change the codes for operator services (CF=Call Forwarding).
Register
To register a new handset, see separate description.
Handset PIN You can change the pin code (0000 on delivery).
Default Set
Resetting the handset.
Cordless Baby Monitor
If you place the handset near the child (but out of reach), then you will receive a call if the
sound from the child’s room exceeds a set sensitivity level. You will then be able to hear the
child for one minute.
1.
Access
Baby Monitor
according to instructions on previous page.
2.
Scroll to desired setting as below with scroll button.
Activ.
Activate function off/on.
Call to
Select internal call (applies to +1...) or external call.
Level
Setting of sensitivity level.
3.
Press
OK
. The display shows
Baby Monitor On
.
4. Test the setup before use by shouting into the handset which is to be
placed near the child, and have someone listen to the other unit.
5. To avoid disturbing the child with incoming calls, you can turn
off the ring signal by pressing and holding the
*
key.
6. Turn off the function by selecting OFF .
Important!
The Baby Monitor is a useful help, but it is obviously not a replacement for
regular baby care.
Ensure the equipment is always out of the child’s reach. Never place the
handset in the cot.
We recommend activating the Call Waiting function on the receiving unit, e.g.
a mobile phone, to avoid missing a call.