Doro 640, Manual

Page: 5 / 20

English
Base unit indicators
Flashes when new SMS* message received (only 650r).
7
Illuminates when charging is in progress.
q
/
Y
Illuminated on standby and flashes during calls (only 650r).
Making a call
1. Enter the desired phone number ( Del =erase).
2.
Press
O
. The number is dialled. Press
L
to terminate call.
Receiving a call
1.
Wait for the handset to ring.
2.
Press
O
to answer. Press
L
to terminate call.
Please note!
As most consumers now use mobile telephones the menu system on this
phone has been designed to work in a similar way ie. the number is dialled
before obtaining a dialling tone. Should you wish to hear a dialling tone
before dialling a number hold down the
O
key for a couple of seconds.
To switch between handset/speaker press . Please remember that in speaker mode, it is only possible for one
person at a time to talk.
This product does not usually ring on the first signal to allow correct matching to the phone book.
When the battery is low or when there is too great a distance to the base unit the telephone will be unable to
connect to a line.
Flash
See Other Info Services.
Volume control
The volume may be adjusted during a call using / ☼ .
Call Back
Press
r
and scroll through the 20 most recently dialled numbers using / ☼ . Press
O
.
Mute button
The microphone may be muted/switched on during a call by using
C
.
KeyGuard
The KeyGuard is turned off/on by pressing
#.
Turning the handset Off/On
Press and hold the
L
button for a few seconds to turn the handset off or on.
Confirm disconnection by pressing Yes .
Paging
The handset will ring when
J
on the base unit is pressed. The signal will stop automatically
after a while or if the
L
button on the handset or the
J
button on the base unit is pressed.
New Message key
Press button to access a new message eg. Caller ID, SMS, message indication or
telephone answer machine (650r only).