English
www.doro.com
1
The Answering Machine (630ri)
Out of memory
The answering machine can record up to 15 minutes in total (this includes the
outgoing message). If the memory is full, no new messages will be accepted
until the existing messages have been played and erased.
When the memory is full the display shows
TAM Mem.Full
and the answering
machine will respond with the ANN message to allow remote playback and
deletion of messages.
Note:
Remember to regularly delete ICM messages to avoid the memory getting full!
Remote password PIN code
To change the remote password PIN code (0000 on delivery).
1.
Press
w
.
2.
Scroll to
Ans. machine
using
{
/
}
. Press
0
.
3.
Scroll using
{
/
}
to
Ch.RemotePIN
. Press
0
.
4.
Enter the old remote PIN code (0000 on delivery). Press
0
.
5.
Enter the new remote PIN code. Press
0
.
6.
Repeat the new remote PIN code again. Press
0
.
7.
Press and hold
C
to return to standby.
Remote activation of the answering machine
The unit incorparates a remote activation facility, if the answering machine
is switched off it will still answer after 10 rings (Australia 16 rings) allowing
remote access.
1.
Dial the telephone number to which the answering machine is connected,
the answering machine will answer after 10 rings (Australia 16 rings). If the
PIN number is still 0000 the answering machine will not answer.
2.
Enter your remote PIN number (see above).
3.
The number of ICM messages will be announced and playback will begin.
Press
1
to stop playback.
4.
To switch the answering machine ON press
0
.
5.
Replace the handset.