Doro 550S, Manual

Page: 5 / 40

English
4 www.doro.com
English
www.doro.com 5
Installation
Unpacking
The package contains:
- Handset - Mains adapter (6VDC 400mA)
- Base unit - Line cord
- 2 batteries (Ni-MH AAA 1.2V 600 mAh)
Models with an extra handset (+1) also include an additional handset, batteries, charger
and mains adapter.
IMPORTANT!
Only use with the supplied power adaptor/s (6V DC 35060040/G060040D25).
Connection
1. Connect the mains adapter to the
y
socket of the base unit and to an electrical
wall socket.
2.
Carefully remove the handset battery cover. Insert the batteries into the handset
ensuring correct battery polarity is observed, and replace the battery cover.
3. Place the handset in the base unit, with the keypad facing outwards. Once the
handset is correctly positioned in the base unit, a beep will be heard.
4.
Leave the handset to charge initially for 24 hours before use.
5. Connect the line cord to
T
socket on the base unit and a network wall socket.
6. Select language according to the description on page 24.
Only for models with an extra handset (+1):
7. Connect the mains adapter to the
y
socket of the charger and to an electrical
wall socket.
8.
Carefully remove the handset battery cover. Insert the batteries into the handset
ensuring correct battery polarity is observed, and replace the battery cover.
9. Place the handset in the base unit, with the keypad facing outwards. Once the
handset is correctly positioned in the base unit, a beep will be heard
10.
Leave the handset to charge initially for 24 hours before use.
Please note!
Under power failure conditions this telephone will not operate. Please ensure that a separate telephone
not dependant on local power is available for emergency use. Do not place the base unit close to other
electrical equipment such as TV sets, computer screens, telecom equipment, fans etc. This will minimize
the risk of interference. Do not place the base unit in areas where it will be exposed to direct sunlight or
other major heat sources.