Doro 550S, Manual

Page: 11 / 40

English
10 www.doro.com
English
www.doro.com 11
Operation
Hands free function
1. Dial the required telephone number. Mistakes can be erased
using ß .
2. Press . The Hands free function will be activated and the telephone
number will now be dialled. The conversation can then be heard through the
loudspeaker.
3. Place the handset on a hard flat surface, e.g. a table.
4. Speak towards the microphone on the lower front edge of the handset (max
1 metre away).
5.
The speaker volume may be adjusted during the call using
{
/
}
. Press
OK
.
to save your setting.
6. To switch to normal handset conversation press .
7. Press
q
to terminate the call.
Please note!
In hands free speaker mode it is only possible for one person at a time to talk. The switchover
between speaker and microphone is automatic and dependent on the sound level of the incoming
call and the microphone respectively. It is therefore essential that there are no loud noises in the
immediate vicinity of the telephone, as this will disrupt the speaker function.
Paging
Pressing
j
on the base unit will activate the paging signal on the handset. This
function is used to help locate the handset or to page the person carrying the
handset. The signal will stop automatically after a while or if the
q
button
on the handset is pressed. The page can also be cancelled by pressing
j
on the
base unit again.