Doro 520, Manual

Page: 6 / 24

English
6 www.doro.com 66
Installation
Belt Clip
A belt clip is fi tted to the back of the handset allowing the handset to be
attached to a belt, shirt pocket or similar.
Wall Mounting
The telephone can be wall mounted using two vertically mounted screws, 88
mm apart. The screws should then fi t into the two ‘keyholes’ on the back of the
base unit.
Australia only: To wall mount using the standard wall plate fi t the supplied
bracket to the underside of the base unit. A click will be heard when fi tted
correctly.
Range
The range of the telephone varies depending on different factors in the
surrounding environment. The radio waves transmitting the call may be
hindered by obstructions, reducing the range.
Specifi ed ranges require unobstructed transmission between the handset and the
base unit. In such ideal conditions, the telephone range can be up to 300 metres.
In a densely populated area, house, apartment, etc. the range of the telephone
will be reduced. Try to get the best range by relocating the base unit. The ideal
location for the base unit is a high and unobstructed place.
When using the handset close to the range limit during a call, the sound quality
will decrease and the call may be disconnected.
IMPORTANT!
To reduce the risk of possible interference please do not locate the base unit near any electrical
equipment e.g. TV’s, computers, fridge’s, telecom equipment etc or close to radiators, metal pipes
or window frames. Also ensure the base unit is not exposed to direct sunlight, excessive heat,
damp or high humidity locations.