INSTALL/REMOVAL INSTRUCTIONS: WINDOW REGULATOR
741-644
Disclaimer:
Even though every attempt is made to ensure this information is complete and accurate, it is impossible to account for all possible circumstances or situations. Please consult with a qualifi ed auto technician
before attempting to perform any work you are not qualifi ed to do. Automobiles can be hazardous to work on; be sure to take all necessary safety precautions. Failure to do so may result in property damage
or personal injury. Certain motor vehicle standards and performance requirements may apply to your motor vehicle (such as Federal Motor Vehicle Safety Standards by the National Highway Traffi
c Safety
Administration). Be sure that your work is performed in accordance with such standards and that you do not disable any motor vehicle safety feature.
ATTENTION:
Refer to the appropriate shop manual for your vehicle to obtain specifi c service procedures for this part. If you do not have
a service manual or lack the skill to install this part, it is recommended that you seek the services of a qualifi ed technician. Pay special
attention to all cautions and warnings included in the shop manual. Read and follow all instructions carefully.
8
©2011 Dorman Products, Inc.
No reproductions in whole or in part without prior written approval.
STEP 7:
Operate the window lift motor using
the switch and send the window to the
top position making sure that it is aligned
properly in the window guide clamps and
is parked properly at the top of its travel.
Tighten the 10mm window clamp guide
bolts evenly and torque to 9 N-m (80 lb in).
STEP 8:
Tighten the six 10mm regulator
mounting bolts in the following order: Bolt
A, D, C, F, B, E. Tighten the bolts to 9 N-m (80
lb in).
STEP 9:
Lubricate the window run channels.
