Multi Floor Controller
PK3661
03-19
5
2.1 Features
The MFC-X is designed to operate either on-
line or stand alone elevator control units (ECU).
It provides access control and secure stops for
multiple floors and functions with RFID contactless
lock models and System 6000 features.
The system can control any RFID ECU up to 500
feet (150m) away when using the MFC system.
NOTE: For installation of the contactless reader
of distances greater than 500 feet (150m)
please contact dormakaba Technical
Support.
The Contactless Card Reader can be mounted
directly on the inside of the elevator car, typically on
the elevator call button panel. For surface mount,
the surface area required for the contactless
reader is 5"W x 5"H x 2"D (12.7 x 12.7 x XXcm) *2"
depth behind panel required)
The MFC is an access control solution that can
operate 2 individual card readers, provides multiple
relays, and much more as per the feature list below.
See figure 1 for a typical configuration.
2.0 Product Description
Feature MFC
Variable access delay
Standard
Power failure 3-day auto-recovery; real time clock (RTC)
Standard
Relay bypassing (passage function)
Standard
Control up to two card readers
Standard
Unlock delay programmable by Dip Switches
Standard
Fire Alarm Input
Standard
Tamper Alarm Input
Standard
Power Status LEDs feedback
Standard
Relay Expansion Board (Up to 4) with up to 8 relays each
Standard
Power Adapter
Keypad
RAC 660G
MFC-X
Up to 2
Readers*
Up to 32
Power Adapter
Figure 1
