Confidant RFID Exit Device Operators
PK3664-T
04-17
5
3- Introduction and disclaimers
CAUTION
WARNING
IMPORTANT
These instructions are designed for use by maintenance professionals or lock installers who are familiar
with common safety practices and competent to perform the steps described. dormakaba is not
responsible for damage or malfunction due to incorrect installation, that may arise.
CAUTION
WARNING
IMPORTANT
Carefully inspect windows, doorframe, door, etc. to ensure that the recommended procedures will not
cause damage. dormakaba’s standard warranty does not cover damages caused by installation.
CAUTION
WARNING
IMPORTANT
Wear safety glasses when making the holes.
4- Install spindle
From hardware bag, choose the required spindle for the door thickness. Choose a spindle that engages by
1/8" minimum in the exit device chassis and that it is not too long to bottom-out against the exit device
mechanism to jam the lock assembly, once it is tightened down.
For the spindle position see the table in the document named "spindle position"
Insert Spindle
