WATCHMAN Installation Instructions
PID1244R6-6
For Assistance: [email protected] (909) 591-8431
Page 3
Installation Steps
• Level
• Tape Measure
• 5/32" Allen Wrench
• Ferrule Crimper
• Wire Cutters
• Screwdriver (Varies)
• Ladder
• RTV Silicone (optional)
• Suspension Hardware (the following is recommended):
- 5/16" x 9" Turnbuckles [Qty 2]
- 3/32" Uncoated Cable [Length dependent on installation]
- 3/32" Aluminum Ferrules [Qty 8]
• C Cell Batteries [Qty 8] (Battery-powered models only)
Make sure that none of these parts are missing and/or damaged before beginning installation. If there are parts missing
and/or damaged, please stop the installation and contact Alvarado.
The Watchman serves as a visual and audio deterrent that warns forklift drivers and management of potential collisions
between forklifts and fixtures before they happen. The Watchman installs in front of overhead doors, racking or virtually
any fixture in a factory or warehouse. Impact with the Watchman tube triggers a loud alarm and flashing red lights. This
warns the forklift driver to stop immediately and alerts management of the incident.
Battery-Powered Models
1. Tube Assembly
2. Battery Installation
3. Placement and Mounting
4. Functions Check
AC-Powered Models
1. Tube Assembly
2. Placement and Mounting
3. AC Power Cord Connection
4. Dry Contact Output Connection (Optional)
5. Functions Check
Parts List
Function
For questions, please contact Alvarado at (909) 591-8431, Monday – Friday7:00am to 4:00pm PST.
Please read this manual completely before installing or operating the product.
• 25' AC Power Cord [Qty 1]
• Power Supply [Qty 1]
• Screw Terminal Connector [Qty 1]
Tools Required
Additional Required Items (Not Included)
AC Power Models (Only)
Left End Tube
Center Tube
Right End Tube
Main End Cap
(QTY1)
Secondary End Cap
(QTY1)
Binding Bolt
(QTY2)
