background image

dormakaba 8900 SIS, SISJ, SISH, SISJH Installation Instructions

08279451

09-2019

8900 Surface Applied Closers

7

Top jamb mount

3.3  Securing main arm to door/frame

Fig.7 

3.3.1 

Secure adjusting tube to damper.

• 

Use one 7/8” x 1/2” torx head shoulder bolt provided.

3.3.2 

Secure damper assembly to frame.

• 

Use two 5/16” x 2” flat head screws  

[#20 x 2” flat head wood screws] provided.

3.3.3 

Secure main arm to operator pinion.

• 

Use a torque wrench (25 ft-lbs) and provided pinion 

screw [M8 x 30 socket head cap screw].

NOTE: To disassemble hold open plate:

• 

Remove both screws from bottom of plate using a 3/16” 

hex key.

• 

Keeping all washers in place, flip plate over to orient as 

per image above.

• 

Re-secure plate with both screws.

3.4  Securing main arm to closer

Fig.8 

3.4.1 

Slide end of connecting arm into end of damper 

assembly. 

3.4.2 

Secure connecting arm and bar/shoe assembly.

3.4.3 

Use provided fastener [5/16-18 x 3/8 hex bolt].

Damper/ 
Damper 
assembly

Main/
connecting 
arm assembly

Pinion

Pinion 
screw

Adjusting 
tube

Left hand 
door shown

Damper

Adjusting 
tube

7/8"x1/2" 
torx head 
shoulder bolt

Hold open

Bar/shoe 
assembly

Pinion

Pinion 
screw

Main/
connecting 
arm assembly

Left Hand (LH) 

Configuration Plate 

pointing to the LEFT

Right Hand (RH) 

Configuration Plate  

pointing to the RIGHT

Hold open 

plate

Non-hold open

Hinge

3

Main arm

Damper 
assembly

5/16-18 x 3/8" 
hex bolt

Connecting 
arm

Left hand 

door shown

Left hand 

door shown

Summary of Contents for 8900 SIS










Reviews: