DORMA USA, Inc.
Dorma Drive, Drawer AC
Toll-Free: 800-523-8483
E-mail: [email protected]
08280611 06/14
Reamstown, PA 17567
Fax:
800-274-9724
Subject to change without notice
TABLE OF CONTENTS
—
Technical specifications
Note
1.
Drawing is not to scale.
2.
Dimensions are in inches/[mm].
3.
Right hand door is shown.
4.
Caution: sex nuts are required for attachment of
components to unreinforced doors and to wood or
plastic faced composite type fire doors, unless an
alternative method is identified in the individual door
manufacturer's listings.
5.
Template is for 4-1/2 x 4-1/2 butt hinges & 3/4" offset
pivots
6.
Maximum door opening degree is 110°.
7.
Minimum door width is 36".
Templates
Closer overall
Technical specifications
Door template
Size selection chart
2
Closer setup
Exploded parts list
Handing of the door
3
A. Mounting the surface closer
Installing the mounting plate
Installing the surface closer
4
B. Adjustments
Adjusting the closing speeds
Adjusting the spring force
6
Adjusting the optional hold open
7
C. Mounting the closer cover
Installing the cover
7
Contents
NOTE: Refer to the included drawing for pull side door closer back plate mounting templating.
Size selection chart
Door Width
Closer
Interior/
Exterior
3'-0"
max.
3'-6"
max.
4'-0"
max.
TS9315
Interior
8.
Hold open range is from 80° to 105°.
9.
Use closer body style "G" for this installation.
10.
Arrows on closer mounting plate point downward.
