8900 EMF
(NO DETECTOR)
Each (HO) hold open unit contains a door closer and track assembly with hold open electromagnet.
The unit can be connected directly to a fire control panel.
1
.
Read entire instruction sheet prior to installation and refer to NFPA 72E. Standards may be obtained from
THE NATIONAL FIRE PROTECTION ASSOCIATION, Batterymarch Park, Quincy, MA., 02269.
2
.
Reference unit carton for mounting style and voltage.
3
.
Prepare door and frame for fasteners using the appropriate template. Mark, drill and tap holes as indicated.
If surface wiring is used, omit 7/8" hole for wire access.
4
5
Install closer to door.
8900PT
8900T AND 8900DE
HINGES
(LEFT HAND DOOR)
(RIGHT HAND DOOR)
CL
HINGES CL
(4)
QTY
(4)
WOOD FRAMES
METAL FRAMES
QTY
C HINGES
L
HINGES LC
(LEFT HAND DOOR)
(RIGHT HAND DOOR)
T & DE (RH)
T & DE (LH)
NOTE: NO TOP PLUG
ON PT MOUNTS
surface wiring installations.
the installation type. Any access hole can be used for
Remove (1) wire access plug according to
SURFACE WIRING
NOTE:
Three access wire
holes on optional
surface wired units only.
INSPK NO. 08279520 Rev 08/13
www.dorma-usa.com 1-800-523-8483
INS NO.
Rev.
08281000
08/13
PAGE
1 of 5
