Doremi Dimension-3D Page 47 User Manual Download

Page: 47 / 49

7 Annex A: Specifications

7.1 Inputs

•

HDMI without HDCP

•

Single or Dual Stream HDSDI. For dual stream HDSDI, the two inputs must comply with
SMPTE Standard S372M, i.e., genlocked with no more than two to three pixels of
difference

7.2 Outputs

•

Single or Dual Stream HDSDI

•

Single HDMI Output without HDCP

7.3 Video

•

All standard 720, 1080 and 2K (2048X1080 4:4:4 at 12 bits) video formats supported for
input

•

All outputs are in a progressive or interlaced formats up to 1920x1080 in line with current
display technologies

7.4 Audio

•

16 channels of audio supported embedded in HDSDI

•

8 channels using HDMI

•

8 channels AES audio outputs

•

Audio delay can be set from the GUI, front panel, or the IR Remote Control (1 to +2 frames)

7.5 Supported 3D Modes

•

Line by Line

•

Side by Side

•

Frame packing as defined in HDMI 1.4 specifications

•

Checkerboard (HDMI progressive formats only)

•

Top/Bottom

•

Dual Stream (HD-SDI only)

•

Left Eye (Output only)

•

Right Eye (Output only)

DM3.OM.001026.DRM

Page 47

Version 1.4

Doremi Labs Inc.

Summary of Contents for Dimension-3D


















































Search results

Summary of Contents for Dimension-3D

Reviews:

Related manuals for Dimension-3D

Brands by name

Popular brands

Doremi Dimension-3D, User Manual

Search results

Summary of Contents for Dimension-3D

Reviews:

Related manuals for Dimension-3D

Brands by name

Popular brands