NOTE:
The barrel nut (3) can be rotated using a screwdriver (not included) to properly align with the
bolt coming through side rail (G).
STEP 6
Insert barrel nut (3) into the hole on the wide surface of center support slat (J). Ensure the barrel nut
(3) is flush with center support slat (J).
Insert the support slats (K & L) into the grooves of left side rail (G).
Attach the left side rail (G) to center support slat (J) with hex socket head bolt (2). Make sure that
barrel nut (3) is properly aligned to allow hex socket head bolt (2) to be installed.
Use Allen Key (4) to fully tighten the bolt.
TODDLER BED
WM3239 / WM3239E / WM3239W
3
2
8
