15
Storing Harness System
16
Only store the harness system when converting child
restraint into a booster seat.
To remove accessories, see page 25.
1.
Fully Loosen Harness
Straps
Push down on harness release
lever (under fl ap on front of seat
pad) while pulling out on harness
straps as shown.
2.
Unbuckle Harness
Press in towards the
top
of the
red button.
Pull buckle tongues out.
3.
Locate Buckle’s Metal
Retainer
Fully recline the child restraint and
reach under the seat between the
base and shell and through the
recline handle. Rotate metal
retainer and push it up through
shell and pad.
4.
From Top of Seat,
Pull Buckle Out of Shell
and Pad
Store the buckle in a safe place for
future use.
continued on next page
Reclining Child Restraint
How to Change Positions
To recline,
pull out on recline handle
and push top of child restraint back.
For upright,
pull out on recline
handle and pull top of child restraint
forward.
This child restraint has 3 positions:
Rear Facing
-
3
or 2
For children who cannot sit up
unassisted
, the level line on shell
MUST
be parallel with the ground
using either position
3 or 2
.
For children who can sit up
unassisted
, you may rotate the child
restraint to be more upright.
Forward Facing
-
1
Upright
Booster Seat
-
1
Upright
3
2
1
NOTE:
When forward facing, the reclined positions are to be
used only to install the child restraint and booster seat flush
against the vehicle seat back. Vehicle seat back must be
upright.
