background image

*

*

*

*

*

*

*

*

*

*

*

*

*

*

*

*

PROHIBIT MORE THAN ONE PERSON ON UPPER BUNK.

KEEP THESE INSTRUCTIONS FOR FUTURE USE.

THE MATTRESS PLATFORM IS DESIGNED TO SUPPORT A MATTRESS WITHOUT THE NEED FOR A 
POSTURE BOARD OR BOX SPRING.

USE ONLY COIL SPRING MATTRESSES ON BOTH THE UPPER AND LOWER BUNKS. FAILURE TO DO 
SO CAN RESULT IN INJURY.

DO NOT ALLOW HORSEPLAY ON OR UNDER THE BED AND PROHIBIT JUMPING ON THE BED.

ALWAYS USE THE RECOMMENDED SIZE MATTRESS OR MATTRESS SUPPORT, OR BOTH, TO HELP 
PREVENT THE  LIKELIHOOD OF ENTRAPMENT OR FALLS.

USE ONLY MATTRESSES WHICH ARE  74"-75" LONG AND 37 1/2" - 38 1/2" WIDE ON UPPER AND ON 
LOWER BUNKS. ENSURE THICKNESS OF MATTRESS DOES NOT EXCEED 6". SURFACE OF 
MATTRESS MUST BE AT LEAST 5" (127MM) BELOW THE UPPER EDGE OF GUARDRAILS.

DO NOT ALLOW CHILDREN UNDER 6 YEARS OF AGE TO USE THE UPPER BUNK.

ALWAYS USE THE LADDER FOR ENTERING AND LEAVING THE UPPER BUNK.

DO NOT USE SUBSTITUTE PARTS.  CONTACT CUSTOMER SERVICE FOR REPLACEMENT PARTS.

USE OF A NIGHT LIGHT MAY PROVIDE ADDED SAFETY PRECAUTION FOR A CHILD USING THE 
UPPER BUNK. 

E-MAIL: [email protected]

   WARNING

STRANGULATION HAZARD

 - NEVER ATTACH OR HANG ITEMS TO ANY PART OF THE BUNK BED 

THAT ARE NOT DESIGNED FOR USE WITH THE BED; FOR EXAMPLE, BUT NOT LIMITED TO  HOOKS, 
BELTS AND JUMP ROPES.

FOLLOW THE INFORMATION ON THE WARNINGS APPEARING ON THE UPPER BUNK END 
STRUCTURE AND ON THE CARTON. DO NOT REMOVE WARNING LABEL FROM BED.

THE USE OF WATER OR SLEEP FLOTATION MATTRESSES IS PROHIBITED.

ALWAYS USE GUARDRAILS ON BOTH LONG SIDES OF THE UPPER  BUNK. IF THE BUNK BED WILL 
BE PLACED NEXT TO THE WALL, THE GUARDRAIL THAT RUNS THE FULL LENGTH OF THE BED 
SHOULD BE PLACED AGAINST THE WALL TO PREVENT ENTRAPMENT BETWEEN THE BED AND 
WALL (APPLICABLE FOR BUNK BEDS WITH FULL LENGTH GUARDRAILS ON ONE SIDE).

PERIODICALLY CHECK AND ENSURE THAT THE GUARDRAIL, LADDER AND OTHER COMPONENTS 
ARE IN THEIR PROPER POSITION, FREE FROM DAMAGE, AND THAT ALL CONNECTORS ARE TIGHT.

Montreal, Quebec

Canada, H1G 3L1

CUSTOMER SERVICE

If you are missing parts or have any questions about this product, contact our customer service representative 
first!

CALL 1-800-295-1980 

You can also order parts by writing to the address listed below.  Please include the product model number, color 
and a detailed description of the part.

Customer Service Department No. 413

12345 Albert-Hudon Boulevard, Suite 100

Summary of Contents for DL7519E




















Reviews: