background image

     

        

CAUTION:

 This unit is intended for use only with the products and/or 

maximum weights indicated. Use with other products and/or products 

heavier than the maximum weights indicated may result in instability or 

cause possible injury.

TWIN BUNK BED

DL7519E / DL7519W

USE ONLY COIL SPRING 

MATTRESSES ON BOTH 

THE UPPER AND LOWER 

BUNKS. FAILURE TO DO 

SO CAN RESULT IN 

INJURY

.

USE ONLY MATTRESSES WHICH 

ARE  74"-75" LONG AND 37 1/2" -

38 1/2" WIDE ON UPPER AND ON 

LOWER BUNKS. ENSURE 

THICKNESS OF MATTRESS DOES 

NOT EXCEED 6".

DO NOT ALLOW CHILDREN 

UNDER 6 YEARS OF AGE TO 

USE THE UPPER BUNK.  BED IS 

DESIGNED FOR CHILDREN 

RANGING FROM 6 YEARS OF 

AGE TO YOUNG TEENAGERS.

DO NOT ALLOW HORSEPLAY ON 

OR UNDER THE BED AND 

PROHIBIT JUMPING ON THE BED.

MAXIMUM WEIGHT 
CAPACITY:165 LBS

(75 KGS) PER LEVEL.

DO NOT RETURN PRODUCT TO THE STORE.

If a part is missing or damaged, contact our customer service 

department. We will replace the part 

FREE

of charge.

Tel #: 1-800-295-1980

E-Mail: [email protected]

Fax #: 514-353-7819

NEED HELP!

CALL US FOR ASSISTANCE

1-800-295-1980

DO NOT RETURN PRODUCT TO STORE
E-MAIL:[email protected]

Summary of Contents for DL7519E




















Reviews: