STEP 6
NOTE:
If you notice that any of the slats (L) are not perfectly flat, be sure to assemble them so
that the slats (L) curves up in the middle and down on the ends.
Insert two slats (T) into the center slots of the bottom side rails (I and K) of the bottom bunk as
shown.
Insert slats (L) into remaining slots of the bottom side rails (I and K) of the bottom bunk. Attach
slats (L) onto the bottom side rails (I and K) with flat head screws (4). Use Phillips screwsdriver
(not included) to tighten the screws (4).
BELMONT BUNK BED
DA1026P-18 PINE / DA1026W-18 WHITE / DA1026WN-18 WALNUT / DA1026B-18 BLACK
Repeat this process for the top bunk.
9
