NOTE: If you notice that any of the slats (L) are not perfectly flat, be sure to assemble
them so that the slats (L) curves up in the middle and down on the ends.
STEP 13
Attach one slat (L) onto side rails (J & K) of the top bunk with flat head screws (4). Make
sure the slat touches the corner posts (as close to the headboard as possible). Attach the
other slats (L) onto the side rails (J & K) with flat head screws (4). Use space block (W) to
space them out evenly as shown. Use Phillips screwdriver (not included) to tighten flat
head screws (4).
K
J
L
