23
24
continued on next page.
Place child restraint
flush
against
the back of the vehicle seat
forward-facing
in the back seat.
The recline position is to be used
only to install the child restraint
flush against the back of the vehicle
seat back, if needed.
Thread the vehicle lap belt or lap/
shoulder belt combination through the belt path and out
other side. Buckle.
Forward-Facing Installation
After deciding whether to use your Vehicle Belts or Lower
Anchor, be sure to read the warnings below as they pertain to
both systems.
When lower anchor is not
being used, fasten belt hooks
together behind the child
restraint as shown.
Forward-Facing Use: 22-40 lbs. (10.1-18 kg), 34-43” (85.1-110 cm), at least 1 year old
Vehicle Belt Installation
Place hand or knee in the
child restraint and push
down firmly while pulling up
on belt to tighten.
WARNINGS
2
Do not use the lower anchor belt along with the
vehicle belt. Secure lower anchor belt when using
the vehicle belts.
Check the vehicle belt before each use. Use only if
the belt is tightened properly and securely.
Failure to follow these warnings can result in
serious injury or death.
Check if your vehicle belts will
work with this child restraint
This is very important because
not all vehicle belts will work
with child restraints.
Review pages 17-19 and your vehicle owner’s manual to
determine what kind of vehicle belt you have and how to lock
a child restraint in place.
1
3