11
Weighing a Patient
1. Stand on the scale platform.
NOTE: The handrails and indicator tower can be grasped during weighing.
2. The indicator will automatically turn on and display weight.
3. The indicator will beep and hold the weight on the display until the scale
shuts off automatically.
Zero Operation
1. Place item to be zeroed out on the scale platform.
2. Press ZERO. The scale will turn on and display a zero weight. If the item is
removed, a negative weight will be displayed.
Note: If the scale display automatically shuts off, the new zero point will be
saved.
3. Step onto the scale platform and the patient’s weight, less the item’s weight
will be displayed.
4. To reset the scale to zero, Press ZERO again with the scale platform empty.
Note: If the scale zero is not reset with an empty platform, the zero weight will
be retained in memory and cause weighing errors for future patients.
BMI Operation
1. Step onto the scale platform.
2. The display will beep when a stable or average hold weight is achieved.
3. Press BMI. The display will read
5
:
06
, representing 5 feet, 6 inches.
4. To change the value of the flashing digit, press the up and down arrows.
When the correct digit is displayed, press BMI to advance to the next digit.
5. When BMI is pressed to accept the rightmost digit, the BMI value will be
displayed.
Last Weight Operation
1. Press LAST WEIGHT to display the previously held stable or average hold
weight.
2. To display the previous BMI value, press BMI and the previous height is
displayed.
3. If the height is not correct, press the up or down arrows and the height value
can be edited as described in BMI Operation above.
4. If the height is correct, press BMI and the BMI value will be displayed.
5. To display the weight again, press LAST WEIGHT.
Reweigh Operation
1. With the patient standing on the scale platform, press REWEIGH to reinitiate
the weighing process.
Summary of Contents for DS7100
Page 2: ......