9
GB
Mounting the pole foot
This sun shade can be mounted in the
following ways:
– on a cross base;
Article no.: 85999RGO
– on a ground anchor;
Article no.: 85999BRGO
– on a mounting plate;
Article no.:85999MGO
Mounting on a cross base is described
in these assembly instructions and us-
er manual.
If you would like to mount the sun shade
on a cross base, you will also need:
16 concrete slabs, 25 kg each
or
8 concrete slabs, 60 kg each
1. Place 8 25 kg concrete slabs or 4
60 kg concrete slabs in the cross
base. (see Figure
A
).
2. Pull the shade pole with the pole foot
1
horizontally
onto the cross base so
that the two smaller holes
2
are over
the corresponding holes on the base
plate
3
(see Figure
B
).
3. Screw the size 10 hexagon socket
screws
4
and snap rings
5
tight with a
size 10 hex key (see Figure
C
).
4. Erect the shade pole with the pole foot
(see Figure
D
).
Please note:
We recommend hav-
ing
at least 2 other people
help you
erect the shade pole.
5. Put the washers
8
and snap rings
7
in
place and screw the size 14 hexagon
socket screws
6
tight with a size 14
hex key (see Figure
E
and
F
).
6. If you use 25 kg slabs: Place addition-
al 8 concrete slabs (25 kg) in the cross
base. If you use 60 kg slabs: Place ad-
ditional 4 concrete slabs (60 kg) in the
cross base. (see Figure
H
).
The sun shade is now ready for use.
194815 i 20170302.indd 7
194815 i 20170302.indd 7
02.03.2017 14:17:47
02.03.2017 14:17:47
Summary of Contents for 471704
Page 98: ...194815 i 20170302 indd 98 194815 i 20170302 indd 98 02 03 2017 14 18 03 02 03 2017 14 18 03...
Page 99: ...194815 i 20170302 indd 99 194815 i 20170302 indd 99 02 03 2017 14 18 03 02 03 2017 14 18 03...
Page 100: ...194815 i 20170302 indd 100 194815 i 20170302 indd 100 02 03 2017 14 18 03 02 03 2017 14 18 03...
