3510004
- 6 -
For early stopping of scanning of FM radio stations, press the key [ ] (5).
When scanning of radio stations is over, broadcast of the first found "
P01
" radio station will be
played.
3. Temporarily pressing the key
TWS/
(4) or
TWS/
(6), select any of the memorized radio
stations.
Microphone connection
(microphone is not included):
Wireless microphone or dynamic microphone with cable can be connected to the sound system.
1. Switch off the sound system.
2. Turn the microphone volume control
MIC.VOL
(12) to the minimum. By using the control
ECHO
(11), set echo level to the minimum.
3. Insert the microphone pin into the socket
MIC
(10).
4. Switch on the sound system.
5. Speak into the microphone and set the required volume by using the main volume controller
VOL-/VOL+
(8) and the controller
MIC.VOL
(12). Set the required echo level with the echo
controller
ECHO
(11).
Karaoke function:
In order to use karaoke function, first connect microphone according to the description given in
the section "Microphone connection".
1. Switch on the sound system.
2. Select the music source (bLUE/FM/USB/AUH) by pressing the key
MODE
(1).
3. Adjust volume of music and microphone by using the controllers
VOL-/VOL+
(8) and
MIC.VOL
(12).
When using "bLUE" or ''AUH'' mode, adjust volume also in the Bluetooth device or external player.
Lighting effects:
Front panel of the device may be lit with multicoloured LED diodes.
These light effects may be switched on/off by pressing the key
LIGHT
(3).
INSTRUCTIONS FOR CORRECT USE
This is a complicated device and must be handled with care. In order to provide long and reliable
operation of the sound system, please, comply with the instructions described below.
1 Do not put the sound system in a place with very high temperature (over 40˚C).
2 Prevent contact of the system with water or any other liquids.
3 Do not approximate the system with powerful sources of electric field and static electricity.
4 Do not open the housing arbitrarily, do not repair and re-build the sound system.
5 Do not insert non-standard, poor quality or damaged parts, accessories and batteries.
6 When bringing the sound system from cold into a warm room, do not switch it on, but let the
dewy parts dry for approximately two hours.
7 Protect from impacts, falls and powerful vibrations.
8 If the sound system is soaked, switch it off, wipe it down and let it dry for at least 24 hours.
CLEANING
Clean with soft, dry or lightly dampened cloth.
EN
