022-00029AE Operation and Maintenance Manual
Operating Controls 2-25
2.
KICK-DOWN SWITCH (TWO PLACES) /
LOG FORK SWITCH (OPTION)
Kick-down Switch Function - When
transmission is in 2nd gear, pressing this
switch (Figure 50) will shift transmission
into 1st gear. This will allow the driver to
perform a quick digging movement.
Kick-down function range:
•
Automatic: 2nd, 3rd, 4th
•
Manual: 2nd
NOTE:
Kick-down is "RELEASED"
when transmission is placed in
"NEUTRAL” position or the
switch is pressed again
Log Fork Switch Function - When the
button is depressed and held the log forks
are allowed to open and close when
moving the lever from side to side. See
pilot control valve lever (joystick)
movement pattern.
A second kick-down switch (Figure 49) is
on the end of the transmission lever.
3.
HORN BUTTON (TWO PLACES)
Pressing the left button at the tip of the
pilot control valve lever (joystick) (Figure
51) or the button at the end of the
combination switch (Figure 52) will sound
the horn.
NOTE:
Starter switch must be "ON."
Figure 49
Figure 50
2
3
1
HAAA3670
Figure 51
