Maintenance section
107
When Required
You must read and understand the warnings and instructions contained in the Safety section of this manual,
before performing any operation or maintenance procedures.
Operator's Seat, Hood Latch and
Support Cylinder - Check,
Lubricate
1.
Check the operation of the seat adjuster rod.
Make sure that the seat slides freely on its track.
Lightly oil the seat slider tracks if necessary.
2.
Pull the latch to raise the hood and seat
assembly.
Make certain the support cylinder
will hold the hood
open.
3.
Lightly oil the hood latch mechanism and the
rod for the hood support cylinder.
Fuses & Relay Change
NOTE :
If a fuse filament separates, use only the
same type and size fuses for replacement.
If the filament in a new fuse separates,
have the circuits and instruments checked.
NOTICE
Always replace fuses with ones of the correct
ampere rating.
Fuse -
Protects an electrical circuit from an
overload. Opens (filament separates) if an
overload occurs.
Check the fuses. Use a flashlight, if necessary.
