Doosan G20 SIIIA, Operation & Maintenance Manual

Page: 48 / 122

48 G20, 30, 40 SIIIA Operation & Maintenance Manual
ENGINE RUNNING
In manual mode, the load is not transferred to the generator unless a 'loading request' is made.
• Activation of an auxiliary input that has been configured to
Remote Start On Load
or
Auxiliary Mains Fail.
• Activation of the inbuilt exercise scheduler if configured for 'on load' runs.
Note: The load transfer signal remains inactive until the Oil Pressure has risen. This prevents excessive wear
on the engine.
Once the generator has been placed on load, it is not automatically removed. To manually remove the load either:
STOPPING SEQUENCE
In Manual/Start mode the set will continue to run until either:
Once the engine is running and all starting timers have expired. the animated
Engine Running
icon
is displayed.
• Press the
Auto Mode
button to return to automatic mode. The set observes all auto mode start
requests and stopping timers before beginning the
Auto Mode Stopping Sequence
.
• Press the
Stop/Reset Mode
button to remove load and stop the generator.
• Activation of an auxiliary input that has been configured to
Generator Load Inhibit
.
• The
Stop/Reset Mode
button is pressed - The delayed load outputs are de-activated immediately
and the set immediately stops.
• The
Auto Mode
button is pressed. The set observes all auto mode start requests and stopping
timers before beginning the
Auto Mode Stopping Sequence
.