Remove End Cap
REVERSE EDGE / RED GREEN LED INSTALLATION
Installation
DoorKing Part Numbers
8080-080
Reverse Edge
8080-096
Reverse Edge + Red/Greed LED
This kit is designed
to install on a 14 ft aluminum
octagon arm
for a 1601 barrier gate operator or
a 1603 auto spikes operator. It
CANNOT
be used with a 1602 operator.
Note: DO NOT
operate arm with a malfunctioning reverse edge.
Push a screwdriver through hole
in bottom of end cap to release
spring
while
pulling cap off.
Push a screwdriver through the hole in cap to release
spring
while
pushing cap on. Keep pushing cap on
until a “
CLICK
” is heard which locks it in place.
Copyright 2019 DoorKing
®
, Inc. All rights reserved.
120 S. Glasgow Avenue
Inglewood, California 90301
U.S.A.
Tip:
Liquid soap will help
reverse edge slide on easier.
Reinstall End Cap
Slide on Edge
1
2
3
Octagon Arm
Reverse/LED Edge
6
1601-268-B-12-19
